Conflict Minerals Study: Only 25% of Filers Fully Met Dodd-Frank Section 1502 Requirements in 2014


Reading time ( words)

A recent, independent evaluation of the public company “conflict mineral” filings submitted to the SEC for reporting year 2014 under Dodd-Frank Section 1502 found that of the 1,262 companies evaluated, 312 scored a perfect 100% and 245 scored below 75% in meeting the requirements of the SEC rule.

The most noticeable shortcoming was that more than half of the filers did not disclose country or countries of origin of the conflict minerals in their products). Almost half of the filers did not disclose the facilities used to process the necessary 3TG.

The study evaluated the filers’ conflict minerals disclosures against two sets of criteria: those established by the SEC rule and a non-binding “good practice” metric developed by the Responsible Sourcing Network (RSN), a human rights organization and Sustainalytics, a research firm specializing in environmental, social and governance analysis. While the majority of filers met most of the regulatory requirements, most scored significantly lower on the “good practice” measures.

The study was designed and executed by Chris N. Bayer, Ph.D., with the assistance of a broad advisory panel comprised of Fern Abrams of IPC, Lawrence Heim of Elm Sustainability Partners, Michael Littenberg of Schulte, Roth & Zabel, Charles Riepenhoff, Jr. of KPMG and Jonathan Hughes of Assent Compliance.

IPC members interested in learning more about the study are invited to attend a free webinar by Dr. Bayer on September 15.

Share

Print


Suggested Items

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.

Case Study: Example of ASKEY Applying QML Validation

04/23/2020 | Edy Yu, I-Connect007
The PCB007 China team paid a visit to the ASKEY plant in Wujiang, Jiangsu, to learn more about their QML process. In this interview with Qixian Zhang, vice GM of ASKEY’s Electronics Product Quality Assurance Department, he discusses what QML means to ASKEY and the electronics industry as a whole.



Copyright © 2020 I-Connect007. All rights reserved.