Engineered Materials Systems Debuts New Conductive Adhesive


Reading time ( words)

Engineered Materials Systems, a leading global supplier of conductive interconnect materials for circuit assembly applications, announces the introduction of its new EMS 618-15 Adhesive. The room temperature cure two-part conductive adhesive has been designed for circuit assembly applications.

EMS 618-15 is designed to cure in 24-hours at room temperature or rapidly at elevated temperatures. The material has a ten-to-one mix ratio and is available in a two syringe packaging system designed for use with static mix heads. EMS 618-15 forms high strength, high reliability conductive interconnects.

The EMS 618-15 conductive adhesive is the latest addition to Engineered Conductive Materials’ full line of conductive adhesives for circuit assembly applications.

For more information about the EMS 618-15 Room Temperature Cure Conductive Adhesive or to learn how Engineered Material Systems can define, develop and create an engineered material solution that is right for your company, visit www.emsadhesives.com.

About Engineered Material Systems

Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future. For more information, visit www.emsadhesives.com.

Share

Print


Suggested Items

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.



Copyright © 2021 I-Connect007. All rights reserved.