SMART Group Webinar: Electronics in Harsh Environments


Reading time ( words)

SMART Group presented a webinar June 2, 2014 to introduce issues to be explored in depth at a seminar on July 2, 2014 at the National Physical Laboratory (NPL). Technical Director Bob Willis moderated a programme of four presentations from Technical Committee specialists Sue Knight, Richard Boyle, Chris Hunt, and Ian Fox.

Sue Knight from STI gave an introductory overview: Why are electronics needed in harsh environments? "I’ll outline the problems; the other presenters will explain how to solve them!” said Knight. She listed applications in satellite communications and base stations, oil exploration and power generation, and aerospace, automotive, and industrial instrumentation, sensors, and controls.

Against this background, she summarised the main environmental factors affecting the performance and reliability of electronic assemblies. Temperature was the biggest issue: Standard industrial components were typically rated for 85°C maximum operating temperature, and mil-aero components to 125°C. Standard high temperature laminate was only usable in applications up to about 175°C. And solder joints were unreliable when equipment operating temperature approached the melting point of standard solder alloys, particularly if accompanied by mechanical shock and vibration.

Other environmental concerns were the effects of oil, water, mud, and chemicals. How did the harsh environment considerations typically associated with military and aerospace applications relate to everyday electronics? She explained how research and development generated from those areas was often subsequently applied to benefit the functionality and reliability of commercially available equipment.

RoHS had prohibited the use of lead in solders for all but certain specific applications where no practicable or proven alternative existed. High-lead alloys had for many years been used for die-attach and had given reliable results as solders for high-temperature environments. Under current RoHS and ELV legislation, they could continue to be used in selected electronics and automotive applications, but if and when suitable alternatives to high-lead solders were found then it was likely that the legislation would be amended to prohibit all use of lead-containing materials.

Solder specialist Richard Boyle from Henkel discussed the EMEA Solder Replacement Umbrella Programme, which had the initial aims of finding suitable replacements in terms of electrical, thermal, and mechanical performance, developing products in compliance with 2014 RoHS and ELV standards, and ideally producing drop-in alternatives to existing paste, wire and preforms. The preliminary focus was on paste, potentially the simplest option. The programme was taking a multi-faceted approach, looking at different solutions for sub-segments of the market, in respect of application, cost and performance, and was considering organic-based, metallurgic-based, and combination organic-metallurgic approaches including high silver-content organic die attach, epoxy-solder paste based on tin-antimony alloys, transient liquid phase sintering, and silver sintering.

Boyle’s reference to silver sintering was expanded upon by Dr. Chris Hunt, who discussed current research at NPL on sintered silver interconnect technology with different component types and PCB finishes, and NPL’s participation in the TSB-funded Electronic Component Sintered Interconnections (ELCOSINT) project, aimed at development of novel polymeric, sintered interconnection materials to replace high-lead solders and further increase the operating temperature of electronic assemblies. These materials, based on nano-silver, would be suitable for components subjected to operating temperatures of 250° or more, and the technology was designed to be compatible with standard microelectronics manufacturing processes. Several challenges remained to be addressed and mechanical performance and reliability had not yet been fully characterised.

Share

Print


Suggested Items

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.

High-reliability, Low-temperature Solder Alloys

05/18/2020 | Dr. Pritha Choudhury, MacDermid Alpha Electronics Solutions
Increased digitalization and greater connectivity have been driving miniaturization and more complex and integrated designs in electronics. As the real estate on PCBs shrinks, so does the size of packages. However, the drive for finding design solutions for increased performance has continued to expand. The solder joint is an essential part of assemblies for electronic devices as it provides electrical, thermal, and mechanical connections. Therefore, soldering materials have been evolving to enable such a technological revolution.

This Month in SMT007 Magazine: How Engineers Can Use SPI Tools for Verification

05/06/2020 | Nolan Johnson, I-Connect007
Koh Young’s Ray Welch and Brent Fischthal detail how engineers can work with SPI tools to verify how small they can go in component size with their solder paste application, and how the company’s SPI equipment is helping not only to verify but also to help drive the development collaboration between solder paste and stencil printer manufacturers, and inspection tools and software.



Copyright © 2020 I-Connect007. All rights reserved.